Theses/Dissertations from 2021
Khandge, Rahul Sampat, Synthesis and Characterization of Polyether-Ether Ketone Supported TpPa-1 Covalent Organic Framework Membrane for Organic Solvent Nanofiltration
Lau, Pikkin, An Insurance Framework for Cyber-Physical Power Systems Considering Integrated Cybersecurity-Reliability Assessment
Mandal, Ritankar, Two Counting Problems in Geometric Triangulations and Pseudoline Arrangements
Min, Xiaopeng, Silica-Based Materials for Water Treatment Applications: Adsorption and Supported Noble Metal-based Catalysis
Mostaghimi, Soudeh, Developing Optical Imaging Tools to Investigate Metabolic and Structural Biomarkers in Rodent Injury Models
NOOR, SYEDA MAHMUDA, Hydrological Impact of Beaver Habitat Restoration in the Milwaukee River Watershed
Novakovic, Bora, Modular Multilevel Converters with Module-Level Energy Storage for Medium Voltage Applications
Olson, Ryan James, Common-Mode Modeling of Neutral Point Clamped Converter Based Dual Active Bridge
Ortiz, Lizeth, Performance of Centrifugally Cast Austenitic Alumina-Forming Alloys in Coking and Decoking Environments
Qandil, Mohammad, Improvements of Renewable Energy: Cavitation Treatment and Optimization of Hybrid System for Remote Areas
Rahmani, Mehran, Development of Novel Compound Controllers to Reduce Chattering of Sliding Mode Control
Rahman, Mohammad Rizwen Ur, Optimization of the Microfluidic Dielectrophoresis Trap Configuration for Nanoparticle Manipulation
Raizada, Aman, Theoretical and Computational Modeling of Contaminant Removal in Porous Water Filters
Rezaee, Maysam, Bonding Evaluation of Graphene-Oxide Layers on Flexible Substrates
Rostami, Behrouz, Wound Image Classification Using Deep Convolutional Neural Networks
Sen, Rakesh, Characterization and Optimization of the Electrochemical Phosphate Sensor
SHANG, MINGWEI, Optimization of Cathode/Anode Electrode Materials for High Performance Lithium-ion Batteries
Tan, Weijie, Development of a Cloud-Based Traffic Diagnosis and Management Laboratory Based on High-Coverage ALPR
Travia, Sara, Fabrication of Double-Walled Polymeric Microspheres for Improved Bone Healing and Regeneration.
Trujillo, Dulay Manuel, LC-MS/MS Quantitative Method for Trace Analysis of Pesticides in Urban/Suburban Water Wells in Milwaukee, Ozaukee, Washington, and Waukesha Counties in Wisconsin
Wang, Yale, Understanding Heterostructure Chemiresistive Gas Sensing at Room Temperature
Wenninger, Dustin, Study of Lead Sulfate Growth Kinetics in Lead Acid SLI Batteries
Yavarishad, Niloufar, A High-Bandwidth, Spectrally Broad Photodetector Based on Optically-Induced Seebeck Effect
Theses/Dissertations from 2020
Abbas, Ahmad Ibrahim Mohammad, Numerical and Experimental Investigation of Performance for Very-Low-Head Micro and Pico Kaplan Hydro-Turbines with Rim-Driven Generators
Ahmed, Tanvir, Development and Control of a 3-DoF Exoskeleton Robot for Forearm and Wrist Rehabilitation
Alkhafaji, Ahmed Ali, Numerical and Experimental Investigation of Aeration Self Mixing By Using Pulsating and Continuous Air Flow
Al-Mahameed, Farah Jazi, Comprehensive Safety Analysis of Vulnerable Road User Involved Motor Vehicle Crashes
Blumenthal, Aaron Seth, The Instability of Verge-Foliot Clocks in Contrast with the Isochronicity of Pendulum Clocks: A Study of Verge-Foliot Kinematics
Carrison, Parry, Selective Actuation and Sensing of Antisymmetric Lamb Wave Mode Using D15 Piezoelectric Transducers
Chen, KuanJui, Remanufacturing Process Planning Considering Quality Uncertainties, Environmental Taxes and Incentives
Chuang, Ching-Ya, A Mathematical Approach to Paint Production Process Optimization
Ding, Xueni, Health Condition Assessment of Multi-Chip IGBT Module with Magnetic Flux Density
Espindola Canon, Juan Camilo, Investigation of Co-Pyrolysis and Co-Gasification of Chicken Manure and Rice Husk
Ghazaleh, Husam, The Design and Validation of a Discrete-Event Simulator for Carbohydrate Metabolism in Humans
Ghorashi, Roya, Math Models and Heuristic Methods for Constructing Fair Political Districts
Hoeft, Nicholas, Power Electronic Architecture for Multi-Vehicle Extreme Fast Charging Stations
Hosseini, Seyed Rasoul, Design and Optimization of a Modular DC-DC Power Converter for Medium Voltage Shipboard Applications
HSU, JUI-HSIN, Bullwhip Effect of a Closed Leep Supply Chain with and Without Information Sharing of Customer Demand
Islam, Md Rasedul, Design and Development of a 7 DOF Robot with Ergonomic Shoulder for Upper Limb Rehabilitation
Jamel, Murtatha Mohammed, Designing and Investigating a Novel Biodegradable-Nontoxic Mg-Mn-Zn-Na-K Alloying System
Jankovic, Zeljko, Modulation and Control Techniques for Performance Improvement of Micro Grid Tie Inverters
Juntunen, Cory, Deep Learning Assisted Fourier Transform Imaging Spectroscopy
Kalantari, Amir H., Reevaluating Order Fulfillment Decisions for E-Tailers Under True Simulated Operating Conditions
Karami, Marzieh, Three-Level Converters for Low Voltage Active Front End Motor Drives
Khalil, Hani A., A Reinforcement Learning Approach to Sequential Acceptance Sampling as a Critical Success Factor for Lean Six Sigma
Khazaei, Bahram, Development of a Hydrodynamic and Sediment Transport Model for Green Bay, Lake Michigan
Lashkari, Shabnam, Sequencing Multiple-Spreader Crane Operations: Mathematical Formulations and Heuristic Algorithms
Liu, Hua, Novel Adhesive Anchoring System Through Engineered Interface
Lynch, Edward, Characterization of Fiber Bragg Grating Based, Geometry-dependent, Magnetostrictive Composite Sensors
Mehrvar, Shima, Quantitative Optical Imaging of Metabolic and Structural Biomarkers in Rodent Injury Models
Poddar, Swadesh, Design and Analysis of Fully-Electronic Magnet-Free Non-Reciprocal Metamaterial
Roy, Prosun, Scaling and Entropic Approaches to Clusters in Materials Science and in Network
Samuel, Thomas, Novel Approach in Measuring Training Effectiveness
Shah, Viren, Deterministic Model of the Voltage Dependent Anion Channel (VDAC) Kinetics
Sheikhzad Saravani, Mandana, Investigation of Heat Transfer in Stationary and Rotating U-Duct Passage Representing Internal Cooling of Gas Turbine Blade Channel
Si, Jingyu, Development of an Advanced Zinc Air Flow Battery System (Phase 2)
Swapnil, Asif Al Zubayer, Intelligent Therapeutic Robot: Design, Development, and Control
Trisha, Shamsi Mosharraf, Public Transit and Micro-mobility: Identifying the Impacts of Bikeshare on Public Transit Ridership in the City of Chicago
Tung, Che-Wei, Automated Digit Recognition on Sound Pressure Level Meters Based on Deep Learning
Vygoder, Mark, A Hardware-in-the-Loop Platform for DC Protection
Waite, Matthew, Sustainability in Construction: Using Lean Management Principles to Reduce Waste
Wang, Chuanbo, Medical Image Segmentation with Deep Learning
Wang, Te-An, Experimental Study on Side Resistance of Energy Pile in Winter-mode Operation
WANG, WENYU, Graphical Convolution Network Based Semi-Supervised Methods for Detecting PMU Data Manipulation Attacks
Williamson, Victor, Mobile Wound Assessment and 3D Modeling from a Single Image
Xu, Yihan, Computational Materials Science and Engineering: Model Development and Case Study
Theses/Dissertations from 2019
Al-Haddad, Muhannad R., Investigation of Performance and Cavitation Treatment in a Kaplan Hydro Turbine
Al-Haddad, Muhannad R., Investigation of Performance and Cavitation Treatment in a Kaplan Hydro Turbine
Al-Hajjeh, Ashraf, Cavity Environmental Control System Upgrade for NASA’s Stratospheric Observatory for Infrared Astronomy
Aljuboori, Mohammed, Energy Dissipating Connector for Precast Shear Walls in High-Seismic Areas
Alqam, Hanaa M., Response Transmissibility for Load Identification Improved By Optimal Sensor Locations
Altammar, Hussain, Structural Health Monitoring of Laminate Structures Using Shear-Mode Piezoelectric Sensors
Al-Zaleq, Du'a, Optical Fiber Communication with Vortex Modes
Azarfar, Ghazal, Light Scattering in Diffraction Limit Infrared Imaging
Bae, Jinwoo, Equilibrium Modeling and Policy Analysis of a Biofuel Supply Chain with a Hydroelectric Reservoir
Bahumdain, Ahmed, Multi-Segment Pile-Supported Bridge Approach Slabs for Control of Differential Settlement
Balali, Farhad, A Data-Driven Predictive Model of Reliability Estimation Using State-Space Stochastic Degradation Model
Bashiri, Fereshteh S, Machine Intelligence for Advanced Medical Data Analysis: Manifold Learning Approach
Chen, Chaoyi, Financially Motivated LMP Manipulation By Aggregators in Power Markets
Chen, Wenqing, Dynamic Vehicular Trajectory Optimization for Bottleneck Mitigation and Safety Improvement
Chen, Yu, Fault Diagnosis of HVDC Systems Using Machine Learning Based Methods
Chen, Yu, Fault Diagnosis of HVDC Systems Using Machine Learning Based Methods
Chen, Zhengrong, Model Predictive Control Design for the Secondary Frequency Control of Microgrid Considering Time Delay Attacks
Chen, Zhengrong, Model Predictive Control Design for the Secondary Frequency Control of Microgrid Considering Time Delay Attacks
CHUNG, YI-CHEN, Advanced Metering Infrastructure Security with Software-Defined Network in Smart Grid
Cloutier, Clayton, The Effective Use of Portland Cement in Reactive Powder Hybrid Asphalt Concrete
Davis, Sachin, Novel Non-Invasive Technology for the Detection of Thin Biofilm in Piping Systems (phase - 1)
Davis, Sachin, Novel Non-Invasive Technology for the Detection of Thin Biofilm in Piping Systems (phase - 1)
Deng, Zhenyu, A State Evaluation Method for Solder Layer in MOSFET
Deng, Zhenyu, A State Evaluation Method for Solder Layer in Mosfet
ElGammal, Tarek Mahmoud Mohammed, The Design and Optimization of Jet-in-Cross-Flow (JICF) for Engineering Applications: Thermal Uniformity in Gas-turbines and Cavitation Treatment in Hydro-turbines
Erfanian Nazif Toosi, Hamid Reza, The Effect of Rapid Solidification and Heat Treatment on Microstructure and Electrochemical Properties of Advanced Biomaterial Co-Cr-Mo-C Alloy
Faghihi Zarandi, Mohammad Amin, Experimental, Theoretical and Numerical Evaluation of Wicking Models for Liquid Imbibition in Dry Porous Wicks
Frailey, David, Sensing with Geometry-Dependent Magnetostriction Via an Embedded Fiber Bragg Grating
Gudex, Jacob David, Exploring Methods for Studying Recoverability of Shipboard Electrical Power Distribution Systems