Theses/Dissertations from 2014
Alhaidri, Mohannad A., Characterization of Carbon-Fiber Reinforced Polyetherimide Thermoplastic Composites Using Mechanical and Ultrasonic Methods
Aljuboori, Mohammed, Development and Verification of an Intelligent Sensor System for Roadway and Bridge Surface Condition Assessments
Alsalihi, Mohammed Abdulqader Jalil, Mechanical Properties of Glass Fiber Reinforced Polymer Bars After Exposure to Elevated Temperatures
Altammar, Hussain, Damage Detection of Mixed-Mode Cracks in Large Truss Structures Using Wavelet Transform
Arunkumar, Jayashree, Development and Usability Evaluation of Low-cost Virtual Reality Rehabilitation Games for Patients with Upper Limb Impairment
Ashok, Sidharth Parmar, Modeling and Protection Scheme for IEEE 34 Radial Distribution Feeder with and Without Distributed Generation
Baumgartner, Ryan Andrew, An Optogenetic Brain-machine Interface for Spatiotemporal Neuromodulation
Bhandary, Moulesh, Speech Perception in Reverberated Condition By Cochlear Implants
Brusso, Jennifer, An Innovation Formula for Privately Held Mid-Sized Companies
Chen, Guorong, Real-Time Analysis and Control of Serial Production Lines for Energy Efficient Manufacturing
Chen, Haoqi, System Theoretic Analysis of Battery Equalization Systems
Chen, Quan, Improved Wind Turbine Control Strategies for Maximizing Power Output and Minimizing Power Flicker
Cross, Thomas, Effects of Ball Milling and Sintering on Alumina and Alumina-Boron Compounds
Das, Sujit Ranjan, Scalable, Efficient and Optimal Discrete-Time Rebalancing Algorithms for Log-Optimal Investment Portfolio
Enders, Leah R., Role of Sensation in Altered Phalanx Grip Force in Persons with Stroke
Forati, Ebrahim, A Novel Transport Based Model for Wire Media and Its Application to Scattering Problems
Francis, Alex B., Experimental, Numerical and Analytical Characterization of Torsional Disk Coupling Systems
Frye, Seth Thomas, Monitoring Changes in Hemodynamics Following Optogenetic Stimulation
Ghiasvand, Omid, Disease Name Extraction from Clinical Text Using Conditional Random Fields
Hardt, Ryan, Ant Build Maintenance with Formiga
Hasegawa, Takahiko, A Study of the Development of an Analytical Wall Function for Large Eddy Simulation of Turbulent Channel and Rectangular Duct Flow
Hejazi, Vahid, Wetting, Superhydrophobicity, and Icephobicity in Biomimetic Composite Materials
Heydar, Mojtaba, Operations Research Modeling of Cyclic Train Timetabling, Cyclic Train Platforming, and Bus Routing Problems
Johnson, Blake Allen, Biomechanical Evaluation of a Jackhammering Task with and Without List Assist
Karbasivalashani, Salman, Transverse Anderson Localization in Disordered Optical Fibers
Kialashaki, Arash, Evaluation and Forecast of Energy Consumption in Different Sectors of the United States Using Artificial Neural Networks
Kim, Haejune, Novel Substrate-Bound Hybrid Nanomaterials for Anode Electrodes in Lithium-Ion Batteries
Kurniati, Katrina Maria, Evaluation of Employment Benefits of Ultra-Heavy Trucks: Wisconsin Case Study
Larson, Christian K., Improving MRI Surface Coil Decoupling to Reduce B1 Distortion
Latifi, Valbon, Evaluation of Pavement Performance Due to Overload Single Trip Permit Truck Traffic in Wisconsin
Li, Qiaotian, Enhancement to Camera Calibration: Representation, Robust Statistics, and 3D Calibration Tool
MasoudiMotlagh, Mohammad, Cryoimaging-Microscopy Implementation for 3D Optical Imaging
Matar, Mohammad, Primary Creep in ASTM A325 Bolts Under Simulated Fire Loading
Mi, Sibei, Short-Term Forecasting of Wind Speed and Wind Power Based on BP and Adaboost_BP
Mortazavi, Vahid, Modeling of Instabilities and Self-Organization at the Frictional Interface
Mushref, Muhammad Abdulrahman, Propagation of an Optical Vortex in Fiber Arrays with Triangular Lattices
Naebulharam, Raed Ahmad, Production Systems with Deteriorating Product Quality : System-Theoretic Approach
Nam, Young Gyu, Effect of Junction Geometry on Monodispersed Microdroplet Generation in Microfluidic Aqueous Two-Phase Systems
Palmer, David Elijah, Stress Ratio Effects in Fatigue of Lost Foam Cast Aluminum Alloy 356
Patel, Divyeshkumar, On the Nonlinear Tribological Jerk Dynamics at Sliding Interfaces
Pourbeyram Kaleibar, Hamed, Nonlinear Processes in Multi-Mode Optical Fibers
Qamhia, Issam I A, Experimental and Analytical Characterization of Regenerated/nano Cellulose Composites
Ramachandran, Lavanya, Design of a Micro-Focus X-Ray Source Validated by Model Protein Crystals
Saavedra Antolinez, Ivan, Understanding the Electricity-Water-Climate Change Nexus Using a Stochastic Optimization Approach
Salami, Negin, Molecular Dynamics (MD) Study on the Electrochemical Properties of Electrolytes in Lithium-Ion Battery (LIB) Applications
Sepehr, Reyhaneh, Optical Studies of Oxidative Stress in Lung Tissue: Rodent Models
Shaeri, Mohammad Reza, Reactor Scale Simulation of Atomic Layer Deposition
Sorussa, Jirapa, Optimizing the Synchronization of Multiple Bus Routes at Multiple Transfer Points Assuming Stochastic Bus Journey Times
Tesch, Ben, An Optimization Method for Estimating Joint Parameters of the Hip and Knee
Van Dyke, Stacy, Comparison of CBR and Pin Puncture Strength Testing Used in the Evaluation of Geotextiles
Vega Valer, Vladimir, Thermal Cooling Effects in the Microstructure and Properties of Cast Cobalt-Base Biomedical Alloys
Wang, Xuechao, Optimal DC Power Distribution System Design for Data Center with Efficiency Improvement
Williams, James Stephen, A Computer Learning Environment for Novice Java Programmers That Supports Cognitive Load Reducing Adaptations and Dynamic Visualizations of Computer Memory
Zhang, Qing, Complex Network Analysis for Scientific Collaboration Prediction and Biological Hypothesis Generation
Zhao, Cunyu, Novel Nanostructured Materials for Solar Fuel Production and Advanced Rechargeable Batteries
Theses/Dissertations from 2013
Abdel Salam, Emad Ismail, System for Detection of Defects in Cables of Bridge Structures
Alberts, Samuel, Mechanics of Bolted Electrical Splices
Ali, Arjumand, Techniques for Optimum Design of Actively Controlled Structures Including Topological Considerations
Ali, Md Hayder, Gait and Locomotion Analysis for Tribological Applications
Alizadeh, Vahid, A Rapid Construction Technique for Bridge Abutments Using Controlled Low Strength Materials (CLSM)
Alkhatib, Fadi, Techniques for Engine Mount Modeling and Optimization
Arakawa, Hitoshi, Heat Transfer Analysis of Two Pass Cooling Channel of Gas Turbine Blade with Analytical Wall Function Turbulence Approach
Cui, Shumao, Tuning the Performance of Nanocarbon-Based Gas Sensors Through Nanoparticle Decoration
Dashti, Ali, Efficient Computation of K-Nearest Neighbor Graphs for Large High-Dimensional Data Sets on GPU Clusters
Didier, Will, Development and Validation of a Mathematical Model for Predicting the Performance of Rotary Hammer Drills
Dressel, Andrew Erwin, Measuring and Modeling the Mechanical Properties of Bicycle Tires
Eheduru, Marcellinus Iheanyi, Indoor Radio Measurement and Planning for UMTS/HSPDA with Antennas
El Effendi, M-Adib, Performance Evaluation of Multiple Antenna Systems
Fawole, Olusola, Analysis of the Effects of Severe Voltage Unbalance on the DC Bus of a Variable Frequency Drive and DC Bus Passive Filtering Harmonic Mitigation
Fu, Qiang, Modeling, Analyses and Assessment of Microgrids Considering High Renewable Energy Penetration
Gandomkar Yarandi, Parisa, High Power Gain Guided Index Antiguided Fiber Lasers and Amplifiers
Ghotbi, Ehsan, Bi- and Multi Level Game Theoretic Approaches in Mechanical Design
Giraldez Pizarro, Luis, Effect of Relative Humidity in High Temperature Oxidation of Ceria Nanoparticles Coating on 316L Austenitic Stainless Steel
Gupta, Deepak Kumar, Inverse Methods for Load Identification Augmented By Optimal Sensor Placement and Model Order Reduction
Ho, Yen-Hsi, Hydrogen Generation from Magnesium Hydride By Using Organic Acid
Huang, Chun-Ju, Neural Network Based Microgrid Voltage Control
Janbaz, Morteza, Mechanical Properties and High-temperature Performance of a Polyester Resin Modified Using FGD Gypsum
Kalantari, Amir Hossein, Facility Location Selection for Global Manufacturing
Keenan, Michael Kevin, Development of a Novel Revison Total Hip Arthroplasty Method for Femoral Component Extraction
Kelly, Patrick Thomas, Investigation of Application Niche for Sustainable Wastewater Treatment Using Microbial Fuel Cells
Khajehnezhad, Milad, A Two-Echelon Location-inventory Model for a Multi-product Donation-demand Driven Industry
Knuth, Jason A., Rolling Contact Fatigue of Low Hardness Steel for Slewing Ring Application
Kothapalli, Ananta, Sediment Microbial Fuel Cell as Sustainable Power Resource
Lee, Solki, Continuum Deformation Model for Drug-Eluting Stent (DES) Medical Devices Using Finite Element Analysis (FEA)
Li, Xiao, Investigation of Some Self-Optimizing Control Problems for Net-Zero Energy Buildings
Mirhassani Moghaddam, Seyed Reza, Finite Element Analysis of Contribution of Adhesion and Hysteresis to Shoe-floor Friction
Misra, Shobhit Krishna, Shape Memory Alloy Reinforced Self-healing Metal Matrix Composites
Nezafati, Marjan, Density Functional Theory (DFT) Study on the Hydrolysis Behavior of Degradable Mg/Mg Alloys for Biomedical Applications
Nyong, Aniedi Effiong, Superhydrophobicity and Underwater Superoleophobicity of Oxidized Surfaces of Some Copper Alloys
Rao, Sunil M., The Effectiveness of Silane and Siloxane Treatments on the Superhydrophobicity and Icephobicity of Concrete Surfaces
Rastegar-Mojarad, Majid, Extraction and Classification of Drug-Drug Interaction from Biomedical Text Using a Two-Stage Classifier