UWM Digital Commons

Rapid Synthesis of Dual-Layered Covalent Organic Framework Membranes via Interfacial Polymerization with Enhanced Desalination Performance, Miguel Angel Jaimes
Theses and Dissertations

Properties of Titanium Dioxide Nanoparticles Aquesous Dispersions Stabilized By Anionic Surfactants, Anita Vuchkovska
Theses and Dissertations

Synthesis and Performance Evaluation of Covalent Organic Framework Nanofiltration Membrane for Per- and Polyfluoroalkyl Substances Removal, Ho-Kuan Yu
Theses and Dissertations

Computational Method to Analyze Novel Industrial-Type Compact Heat Exchangers Fin Designs, Oluwatosin Samuel Aworanti
Theses and Dissertations

Nanofiltration Membranes Made from TpPa-1 Covalent Organic Framework Nanofilms, Dalton Sendelbach
Theses and Dissertations

Synthesis and Characterization of Polyether-Ether Ketone Supported TpPa-1 Covalent Organic Framework Membrane for Organic Solvent Nanofiltration, Rahul Sampat Khandge
Theses and Dissertations

Functional Material Systems for Stimuli-Responsive Interference Coloration, Milad Momtaz
Theses and Dissertations

Electrospinning Processing Techniques for the Manufacturing of Composite Dielectric Elastomer Fibers, Rani Elhajjar
Civil and Environmental Engineering Faculty Articles

Understanding Heterostructure Chemiresistive Gas Sensing at Room Temperature, Yale Wang
Theses and Dissertations

Study of Lead Sulfate Growth Kinetics in Lead Acid SLI Batteries, Dustin Wenninger
Theses and Dissertations

Silica-Based Materials for Water Treatment Applications: Adsorption and Supported Noble Metal-based Catalysis, Xiaopeng Min
Theses and Dissertations

Performance of Centrifugally Cast Austenitic Alumina-Forming Alloys in Coking and Decoking Environments, Lizeth Ortiz
Theses and Dissertations

Applying a Statistical Approach to Develop a Sustainable Technology for Capturing Phosphorous from an Agricultural Tile Drainage System Using By-Product Phosphorous Sorbing Materials (PSM), Amir Kordijazi
Theses and Dissertations

Characterization of Fiber Bragg Grating Based, Geometry-dependent, Magnetostrictive Composite Sensors, Edward Lynch
Theses and Dissertations

Designing and Investigating a Novel Biodegradable-Nontoxic Mg-Mn-Zn-Na-K Alloying System, Murtatha Mohammed Jamel
Theses and Dissertations

Developing Highly Reversible Li Metal Anode with Mossy/Dendritic Li Suppression in High Energy Density Batteries, Xi Chen
Theses and Dissertations

Computational Materials Science and Engineering: Model Development and Case Study, Yihan Xu
Theses and Dissertations

Application of Survival Analysis Techniques to Probabilistic Assessment of Fatigue in Steel Bridges, Azam Nabizadehdarabi
Theses and Dissertations

Surface Alloying of Mild Steel During Casting Process: Microstructural Evolution, Phase Development and Heat Treatment, Kaustubh Kishore Rane
Theses and Dissertations

Quantitative peel test for thin films/layers based on a coupled parametric and statistical study, Maysam Rezaee, Li Chih Tsai, Muhammad Istiaque Haider, Armin Yazdi, Ehsan Sanatizadeh, Nathan P. Salowitz
Mechanical Engineering Faculty Articles

The Effect of Rapid Solidification and Heat Treatment on Microstructure and Electrochemical Properties of Advanced Biomaterial Co-Cr-Mo-C Alloy, Hamid Reza Erfanian Nazif Toosi
Theses and Dissertations

Optimizing Self-Healing Wind Turbine Blades Utilizing Dicyclopentadiene Infused Vascular Networks, GIOVANNI LEWINSKI
Theses and Dissertations

Development of Investment Casting Method for Production of Metal Foams for Tissue Engineering, Justin Aaron Womack
Theses and Dissertations

Improved antibacterial performance using hydrogel-immobilized lysozyme as a catalyst in water, Yuemei Ye, Stanislav Klimchuk, Mingwei Shang, Junjie Niu
Materials Science & Engineering Faculty Articles

Active Polymeric Materials for 3D Shaping and Sensing, Adebola Oyefusi
Theses and Dissertations

In Situ Chemical Probing of Vacancy Defects in Graphene and Boron Nitride at Room Temperature, Ali Ihsan Altan
Theses and Dissertations

In Situ Chemical Probing of Vacancy Defects in Graphene and Boron Nitride at Room Temperature, Ali Ihsan Altan
Theses and Dissertations

The Effective Use of Portland Cement in Reactive Powder Hybrid Asphalt Concrete, Clayton Cloutier
Theses and Dissertations

Using Pythagorean Fuzzy Sets (PFS) in Multiple Criteria Group Decision Making (MCGDM) Methods for Engineering Materials Selection Applications, Alaa Fouad Momena
Theses and Dissertations

Fabrication of Silver-doped Zinc Oxide Thin Films Through Optimized Sol-Gel Deposition and Nanoparticle Wetting Process, Reed T. Heintzkill
Theses and Dissertations

In Silico Analysis of Advanced Processing Methods for Light-weight Alloys Powders, Marjan Nezafati
Theses and Dissertations

Synthesis and Performance Analysis of Polyethersulfone (PES) Nanocomposite Membrane Grafted with Functionalized Iron (II, III) Oxide Nanoparticles for Arsenate Removal, JIYOUNG ROWLEY
Theses and Dissertations

Novel Engineered Porous Materials for the Removal of Lead from Water, Mohsen Hajipour Hajipour Manjili
Theses and Dissertations

Design of Optimized PES-Alumina Polymer Matrix Nanocomposite Membranes for Heavy Metal Ions Removal from Water, Behnam Gohari
Theses and Dissertations

Graphene-Based Lubrication for Tribological Applications: Nanolubricants and Self-lubricating Nanocomposites, Emad Omrani
Theses and Dissertations

Novel Solar Cells Based on Two-Dimensional Nanomaterials and Recycled Lead Components, Xiaoru Guo
Theses and Dissertations

New Approaches to Multi-functional Soft Materials, Seyedali Banisadr
Theses and Dissertations

Synthesis and Characterization of Transition Metal Oxide and Dichalcogenide Nanomaterials for Energy and Environmental Applications, Ren Ren
Theses and Dissertations

Residual Tensile Strength and Bond Properties of GFRP Bars after Exposure to Elevated Temperatures, Devon S. Ellis, Habib Tabatabai, Azam Nabizadeh
Civil and Environmental Engineering Faculty Articles

Real-Time, Selective Detection of Heavy Metal Ions in Water Using 2d Nanomaterials-based Field-effect Transistors, Guihua Zhou
Theses and Dissertations

Effects of Electrolyte Formulation on Graphite Anode for Wide Temperature Application, Jeremy Chang
Theses and Dissertations

Surface Alloying of Plain-carbon Steels During the Casting Manufacturing Process, Michael Beining
Theses and Dissertations

High Temperature Oxidation and Metal Dusting Resistance of Traditional Iron-based and Novel Alumina Forming Austenitic Alloys, Wen-Chieh Lee
Theses and Dissertations

Polymer Foam /Fly Ash Composites: Evaluation of Mechanical, Interfacial, Thermal, Viscoelastic and Microstructural Properties, Parisa Khoshnoud
Theses and Dissertations

Analysis of Zinc Oxide Thin Films Synthesized By Sol-Gel via Spin Coating, Jon Carl Wolgamott
Theses and Dissertations

Spacer Casting Method for Synthesis of Magnesium Alloy Foam, Sara Karp
Theses and Dissertations

Coking Resistance of Alumina Forming Cast Austenitic Stainless Steels, Lizeth Nayibe Ortiz Reyes
Theses and Dissertations

High Temperature Oxidation of Alumina Forming Cast Austenitic Stainless Steels Within an Environment of Pure Steam, Elmer A. Prenzlow
Theses and Dissertations

Synthesis and Characterization of Microporous and Mesoporous Zeolites from Flyash for Heavy Metal Removal from Wastewater, Saeed Golbad
Theses and Dissertations

Corrosion of Aluminum Current Collector in Cost Effective Rechargeable Lithium-Ion Batteries, Shengyi Li
Theses and Dissertations

Microstructure, Wetting Angle and Corrosion of Aluminum-silicon Alloys, Shvetashva Suri
Theses and Dissertations

Aesthetic Coatings for Concrete Bridge Components, Brent Kriha
Theses and Dissertations

Phase Sensitive Thermography of Magnetostrictive Materials Under Periodic Excitations, Peng Yang
Theses and Dissertations

Advanced Self-Healing Polymer Composites for Wind Turbine Blades, Arun Kumar Koralagundi Matt
Theses and Dissertations

Rational Design of Cathode Materials for High Performance Lithium-Sulfur Batteries, Xi Chen
Theses and Dissertations

Nano-Crystalline Metal Matrix Nano-Composites Reinforced By Graphene and Alumina: Effect of Reinforcement Properties and Concentration on Mechanical Behavior, Meysam Tabandeh Khorshid
Theses and Dissertations

Representative Volume Element (RVE) Finite-Element Analysis (FEA) of Al Metal-matrix Composites, Yuzhe Cao
Theses and Dissertations

Synthesis of LiFePO4/C Cathode Nanomaterials for Lithium-Ion Batteries, Chao Cheng
Theses and Dissertations

Nanostructured Organic/Inorganic Semicondutor Photovoltaics: Investigation on Morphology and Optoelectronics Performance, Aruna Wanninayake
Theses and Dissertations

Study of Ceria Nanoparticles Synthesis and the Performance of Nano-ceria Coating for High Temperature Oxidation Resistance in Combustion Atmosphere, Lingke Mao
Theses and Dissertations

The Effective Use of Coal Combustion Products (CCPs) in Ashphalt Pavements, Clayton J. Cloutier
Theses and Dissertations

Effects of Surface Topography and Vibrations on Wetting: Superhydrophobicity, Icephobicity and Corrosion Resistance, Rahul Ramachandran
Theses and Dissertations

In-Situ Synthesis of Aluminum- Titanium Diboride Metal Matrix Hybrid Nanocomposite, Afsaneh Dorri Moghdam
Theses and Dissertations

Synthesis and Performance Analysis of Polyurethane Foam Nanocomposite for Arsenic Removal from Drinking Water, Faten Bakri Hussein
Theses and Dissertations

Investigation of Electrolyte Wetting in Lithium Ion Batteries: Effects of Electrode Pore Structures and Solution, Yangping Sheng
Theses and Dissertations

Finite Element Analysis (FEA) Study of the Thermal Stress Concentrations in Planar-type Sodium Sulfur (NaS) Secondary Batteries, Jeffrey P. Colker
Theses and Dissertations

The Optimization of Concrete Mixtures for Use in Highway Applications, Mohamadreza Moini
Theses and Dissertations

Thermodynamic and Kinetic Simulation of Transient Liquid-Phase Bonding, Brad Allen Lindner
Theses and Dissertations

Tin Nanoparticles Encapsulated in Hollow TIO2 Spheres as High Performance Anode Materials for Li-Ion Batteries, Xiang Pan
Theses and Dissertations

A Study on the Synthesis - Structure - Property - Performance Relationship of Bulk Functionalized Polyurethane Foams for Water Filtration Applications, Subhashini Gunashekar
Theses and Dissertations

Experimental Evaluation of the Effect of Coal Combustion Products on Constructability, Damage and Aging Resistance of Asphalt Mastics, Emil Garibaldy Bautista
Theses and Dissertations

Novel Two-dimensional Nanomaterials and Their Gas Sensing Properties, Haihui Pu
Theses and Dissertations

The Design of High Performance and Ultra-High Performance Fiber Reinforced Cementitious Composites with Nano Materials, Scott W. Muzenski
Theses and Dissertations

The Structure and Ferroelectric Properties of Iron-Doped Lead Titanate, Michael Bartlein
Theses and Dissertations

Novel Substrate-Bound Hybrid Nanomaterials for Anode Electrodes in Lithium-Ion Batteries, Haejune Kim
Theses and Dissertations

Thermal Cooling Effects in the Microstructure and Properties of Cast Cobalt-Base Biomedical Alloys, Vladimir Vega Valer
Theses and Dissertations

Characterization of Carbon-Fiber Reinforced Polyetherimide Thermoplastic Composites Using Mechanical and Ultrasonic Methods, Mohannad A. Alhaidri
Theses and Dissertations

Molecular Dynamics (MD) Study on the Electrochemical Properties of Electrolytes in Lithium-Ion Battery (LIB) Applications, Negin Salami
Theses and Dissertations

Effects of Ball Milling and Sintering on Alumina and Alumina-Boron Compounds, Thomas Cross
Theses and Dissertations

Wetting, Superhydrophobicity, and Icephobicity in Biomimetic Composite Materials, Vahid Hejazi
Theses and Dissertations

Stress Ratio Effects in Fatigue of Lost Foam Cast Aluminum Alloy 356, David Elijah Palmer
Theses and Dissertations

Experimental and Analytical Characterization of Regenerated/nano Cellulose Composites, Issam I A Qamhia
Theses and Dissertations

Modeling of Instabilities and Self-Organization at the Frictional Interface, Vahid Mortazavi
Theses and Dissertations

Enhancing the Structure and Performance of P3HT/PC70BM Polymer Solar Cells with N-Dodecylthiol, Mahmoud Ismail Algazzar
Theses and Dissertations

Mechanical Properties and High-temperature Performance of a Polyester Resin Modified Using FGD Gypsum, Morteza Janbaz
Theses and Dissertations

Applying Computational Methods to Interpret Experimental Results in Tribology and Enantioselective Catalysis, Michael Garvey
Theses and Dissertations

Shape Memory Alloy Reinforced Self-healing Metal Matrix Composites, Shobhit Krishna Misra
Theses and Dissertations

The Effectiveness of Silane and Siloxane Treatments on the Superhydrophobicity and Icephobicity of Concrete Surfaces, Sunil M. Rao
Theses and Dissertations

Growth of ZnO Thin Films on Polar Oxide Surfaces By Atomic Layer Deposition, Kallol Pradhan
Theses and Dissertations

Density Functional Theory (DFT) Study on the Hydrolysis Behavior of Degradable Mg/Mg Alloys for Biomedical Applications, Marjan Nezafati
Theses and Dissertations

Effect of Relative Humidity in High Temperature Oxidation of Ceria Nanoparticles Coating on 316L Austenitic Stainless Steel, Luis Giraldez Pizarro
Theses and Dissertations

Continuum Deformation Model for Drug-Eluting Stent (DES) Medical Devices Using Finite Element Analysis (FEA), Solki Lee
Theses and Dissertations

Synthesis and Compressive Properties of Al-A206/SiC and Mg-AZ91/SiC Syntactic Foams, Gonzalo A. Rocha Rivero
Theses and Dissertations

Probing Bonding and Dynamics at Heterogeneous Adsorbate/Graphene Interfaces, Eric Charles Mattson
Theses and Dissertations

Rolling Contact Fatigue of Low Hardness Steel for Slewing Ring Application, Jason A. Knuth
Theses and Dissertations

Tuning the Performance of Nanocarbon-Based Gas Sensors Through Nanoparticle Decoration, Shumao Cui
Theses and Dissertations

Copper Intercalation into Graphite, Kyle Kalbus
Theses and Dissertations

Material Behavior Characterization of a Thin Film Polymer Used in Lithium-Ion Batteries, Michael James Martinsen
Theses and Dissertations

Development of Nano-ZrO2 Reinforced Self-Flowing Low and Ultra Low Cement Refractory Castables, Cem Gogtas
Theses and Dissertations

Effect of Mechanical Abrasion on Oil/water Contact Angle in Metals, Simin Salam Tabrizi
Theses and Dissertations