UWM Digital Commons

Study of the Various Charactertics of a Helical Vertical Axis Wind Turbine Compared to a Straight Bladed Darrieus Design, Patrick Quinlan
Theses and Dissertations

Design, Development, and Control of a Robotic Gripper for Activities of Daily Living (ADL) Assistance., Jaime Rafael Hernandez
Theses and Dissertations

Wheelchair-Mounted Assistive Robot for Activities of Daily Living: Design, and Validation, Elias Jose Munoz Montenegro
Theses and Dissertations

Mechanical Erosion Investigation Through the Solid Rocket Motor’s Nozzle, Mohamed Ahmed Abdelazim Abousabae
Theses and Dissertations

Study of the Various Charactertics of a Helical Vertical Axis Wind Turbine Compared to a Straight Bladed Darrieus Design, Patrick Quinlan
Theses and Dissertations

Development of an Upper Limb Telerehabilitation System, Md Mahafuzur Rahaman Khan
Theses and Dissertations

Developing and Investigating a Fast and Controllable Prelithiation Method for Lithium-Ion Batteries, Huainan Qu
Theses and Dissertations

Enhancement of Energy Efficiency for Thermal Energy and Biomass Driven Applications, OSAMA Mansour Selim ELSAYED
Theses and Dissertations

Investigation of Heat Transfer Enhancement and Flow Phenomena of Gas Turbine Blade Internal Cooling Passage, Farah Nazifa Nourin
Theses and Dissertations

Experimental and Numerical Investigation of the Effect of Newly Tested Blades on the Aerodynamic Performance and Power Output of a Horizontal Axis Wind Turbine, Alaa Sayed Mahmoud Hasan
Theses and Dissertations

Computational Method to Analyze Novel Industrial-Type Compact Heat Exchangers Fin Designs, Oluwatosin Samuel Aworanti
Theses and Dissertations

Development of a Novel Telemanipulation Framework for Human-robot Collaboration Using PTC ThingWorx and Vuforia Studio, Preet Parag Modi
Theses and Dissertations

Triboinformatic Approaches for Surface Characterization: Tribological and Wetting Properties, Md Syam Hasan
Theses and Dissertations

Optimization of the Microfluidic Dielectrophoresis Trap Configuration for Nanoparticle Manipulation, Mohammad Rizwen Ur Rahman
Theses and Dissertations

Understanding Heterostructure Chemiresistive Gas Sensing at Room Temperature, Yale Wang
Theses and Dissertations

Bonding Evaluation of Graphene-Oxide Layers on Flexible Substrates, Maysam Rezaee
Theses and Dissertations

Development of a 7 DOF Exoskeleton Robot for Rehabilitation of Lower Extremity, SK HASAN
Theses and Dissertations

Theoretical and Computational Modeling of Contaminant Removal in Porous Water Filters, Aman Raizada
Theses and Dissertations

Characterization and Optimization of the Electrochemical Phosphate Sensor, Rakesh Sen
Theses and Dissertations

Improvements of Renewable Energy: Cavitation Treatment and Optimization of Hybrid System for Remote Areas, Mohammad Qandil
Theses and Dissertations

Development of Novel Compound Controllers to Reduce Chattering of Sliding Mode Control, Mehran Rahmani
Theses and Dissertations

Designing and Investigating a Novel Biodegradable-Nontoxic Mg-Mn-Zn-Na-K Alloying System, Murtatha Mohammed Jamel
Theses and Dissertations

Design and Development of a 7 DOF Robot with Ergonomic Shoulder for Upper Limb Rehabilitation, Md Rasedul Islam
Theses and Dissertations

Scaling and Entropic Approaches to Clusters in Materials Science and in Network, Prosun Roy
Theses and Dissertations

Intelligent Therapeutic Robot: Design, Development, and Control, Asif Al Zubayer Swapnil
Theses and Dissertations

The Instability of Verge-Foliot Clocks in Contrast with the Isochronicity of Pendulum Clocks: A Study of Verge-Foliot Kinematics, Aaron Seth Blumenthal
Theses and Dissertations

Numerical and Experimental Investigation of Aeration Self Mixing By Using Pulsating and Continuous Air Flow, Ahmed Ali Alkhafaji
Theses and Dissertations

Investigation of Co-Pyrolysis and Co-Gasification of Chicken Manure and Rice Husk, Juan Camilo Espindola Canon
Theses and Dissertations

Development of an Advanced Zinc Air Flow Battery System (Phase 2), Jingyu Si
Theses and Dissertations

Investigation of Heat Transfer in Stationary and Rotating U-Duct Passage Representing Internal Cooling of Gas Turbine Blade Channel, Mandana Sheikhzad Saravani
Theses and Dissertations

A Parametric Approach to Performative-based Design, Case Study: Earth Tube Ventilation, Hoda Barzegar Ganji
Theses and Dissertations

Development and Control of a 3-DoF Exoskeleton Robot for Forearm and Wrist Rehabilitation, Tanvir Ahmed
Theses and Dissertations

Numerical and Experimental Investigation of Performance for Very-Low-Head Micro and Pico Kaplan Hydro-Turbines with Rim-Driven Generators, Ahmad Ibrahim Mohammad Abbas
Theses and Dissertations

Application of Survival Analysis Techniques to Probabilistic Assessment of Fatigue in Steel Bridges, Azam Nabizadehdarabi
Theses and Dissertations

Vehicle Interior Access Deployable Worksurface Mechanism Concept Product Design, Premchand Gunachandran
Theses and Dissertations

Experimental, Theoretical and Numerical Evaluation of Wicking Models for Liquid Imbibition in Dry Porous Wicks, Mohammad Amin Faghihi Zarandi
Theses and Dissertations

An Application of Clustering and Cluster Update Methods to Boiler Sensor Prediction and Case-Based-Reasoning to Boiler Repair, Timothy Edward Rooney
Theses and Dissertations

Quantitative peel test for thin films/layers based on a coupled parametric and statistical study, Maysam Rezaee, Li Chih Tsai, Muhammad Istiaque Haider, Armin Yazdi, Ehsan Sanatizadeh, Nathan P. Salowitz
Mechanical Engineering Faculty Articles

Response Transmissibility for Load Identification Improved By Optimal Sensor Locations, Hanaa M. Alqam
Theses and Dissertations

Optimizing Self-Healing Wind Turbine Blades Utilizing Dicyclopentadiene Infused Vascular Networks, GIOVANNI LEWINSKI
Theses and Dissertations

Investigation of Dielectrophoretic Microfluidic Trap System for Separation and Parallel Analysis of Single Particles, Tae Joon Kwak
Theses and Dissertations

Trajectory Tracking of a Four Degree of Freedom Robotic Manipulator, Mohammad Rezwan Sheikh
Theses and Dissertations

The Design and Optimization of Jet-in-Cross-Flow (JICF) for Engineering Applications: Thermal Uniformity in Gas-turbines and Cavitation Treatment in Hydro-turbines, Tarek Mahmoud Mohammed ElGammal
Theses and Dissertations

Investigation of Performance and Cavitation Treatment in a Kaplan Hydro Turbine, Muhannad R. Al-Haddad
Theses and Dissertations

Structural Health Monitoring of Laminate Structures Using Shear-Mode Piezoelectric Sensors, Hussain Altammar
Theses and Dissertations

Investigation of Performance and Cavitation Treatment in a Kaplan Hydro Turbine, Muhannad R. Al-Haddad
Theses and Dissertations

Manufacturing Energy Consumption and Assessment for Us Small and Medium Sized Manufacturers, Yadan Zeng
Theses and Dissertations

Transient Analysis of a Coolant-to-Refrigerant Heat Exchanger to Provide Temporary High Performance in an Automotive Vehicle, Abhinav Ravi
Theses and Dissertations

In Silico Analysis of Advanced Processing Methods for Light-weight Alloys Powders, Marjan Nezafati
Theses and Dissertations

Applications of Dynamic Mode Decomposition and Sparse Reconstruction in the Data-Driven Dynamic Analysis of Physical Systems, Mojtaba F. Fathi
Theses and Dissertations

Equivalent Circuit Model Generation for Batteries Using Non-ideal Test Data, Logan Crain
Theses and Dissertations

Coordination and Control for a Team of Mobile Robots in an Unknown Dynamic Environment, Sucheta Roy
Theses and Dissertations

A Novel Numerical Method to Analyze Laminar Flow in Serrated Plate-fin Heat Exchanger Designs, Nabila Rubaiya
Theses and Dissertations

Ultrasonic Sensing and Actuation in Laminate Structures Using Bondline-Embedded d35 Piezoelectric Sensors, Hussain Ahmed Altammar, Anoop K. Dhingra, Nathan P. Salowitz
Mechanical Engineering Faculty Articles

Novel Robust Control of a 7-DOF Exoskeleton Robot, Mehran Rahmani, Mohammad Habib Rahman
Mechanical Engineering Faculty Articles

Towards Better Understanding of Failure Modes in Lithium-Ion Batteries: Design for Safety, Alex B. Francis
Theses and Dissertations

Effects of Metal Sulfate Electrolyte Additives on Charge Acceptance in Agm Batteries, Alex Drake
Theses and Dissertations

AC-Impedance Investigations of Li-Ion Batteries with Wide Temperature Performance, Huainan Qu
Theses and Dissertations

Novel Algorithms for Merging Computational Fluid Dynamics and 4D Flow MRI, Ali Bakhshinejad
Theses and Dissertations

Graphene-Based Lubrication for Tribological Applications: Nanolubricants and Self-lubricating Nanocomposites, Emad Omrani
Theses and Dissertations

High Sensitivity Phosphate Ion Sensor Based on Graphene Oxide Field-effect Transistor, Bing Jin
Theses and Dissertations

Transient Load Recovery Using Strain Measurements and Model Reduction, Bibek Wagle
Theses and Dissertations

Synthesis and Characterization of Transition Metal Oxide and Dichalcogenide Nanomaterials for Energy and Environmental Applications, Ren Ren
Theses and Dissertations

Demand Side Management for Building Energy Efficiency Through Hybrid Daylighting System and Battery Energy Storage System, Tonghui Li
Theses and Dissertations

Impact Load Identification Using Optimal Sensor Placement and Model Reduction, Bella Jackson Chembakassery
Theses and Dissertations

Analysis of Dynamic Mode Decomposition, ARCHANA MUNIRAJU
Theses and Dissertations

Novel Nanostructured Metal Oxide Materials for Water Treatment and Advanced Rechargeable Batteries, Jingwan Huo
Theses and Dissertations

Study of Separator Damage Effects on Lithium Ion Battery Cell's Performance, Mason Pingel
Theses and Dissertations

Application of Sharp- and Diffuse-Front Models for Predicting Mass Gain and Saturation in Fibrous Wicks, Amin Zarandi, Krishna M. Pillai
Mechanical Engineering Faculty Articles

Pulsed Flow Jet Impingement Cooling: Evaluation of Heat Transfer Performance, Michael Lee Hamman
Theses and Dissertations

Electrochemical Detection of Low-concentration Lead (II) Ions from Water, Mohmmad Rizwen Ur Rahman
Theses and Dissertations

Design and Development of a Robot Guided Rehabilitation Scheme for Upper Extremity Rehabilitation, Md Assad-Uz-Zaman
Theses and Dissertations

A Study of Development of a Micro Hydro Turbine System with a Rim Drive and Air Injection Treatment for Cavitation., Tomoki Sakamoto
Theses and Dissertations

Design for Safety: Characterization of Structural Impact on Lithium-ion Batteries, Mehdi Gilaki
Theses and Dissertations

An Array of Circular Dielectrophoresis Traps to Separate and Charaterize Individual Microparticles from Population, Hwangjae Lee
Theses and Dissertations

Numerical Study of Thermal Performance Improvement By Novel Structures in the Building Energy Storage Systems, Junling Xie
Theses and Dissertations

Novel Nanomaterials for Lithium Ion Batteries and Oxygen Reduction Reactions, Jianyang Li
Theses and Dissertations

Performance Optimization of Onboard Lithium Ion Batteries for Electric Vehicles, Rohit Anil Ugle
Theses and Dissertations

Investigation of a Novel Turbulence Model and Using Leading-Edge Slots for Improving the Aerodynamic Performance of Airfoils and Wind Turbines, Saman Beyhaghi
Theses and Dissertations

Self-assembled levitating clusters of water droplets: pattern-formation and stability, Alexander A. Fedorets, Mark Frenkel, Evgeny Shulzinger, Leonid A. Dombrovsky, Edward Bormashenko, Michael Nosonovsky
Mechanical Engineering Faculty Articles

Darcy's Law-Based Model for Predicting Wicking of Liquids in Glass-Fiber Wicks, Mohammad Amin Faghihi Zarandi, Krishna M. Pillai, Adam Kimmel
Mechanical Engineering Faculty Articles

On the Mechanical Response in Boundary Resisted Motion, Maliha Maisha Rahman
Theses and Dissertations

Experimental Investigation of Chicken Manure Pyrolysis and Gasification, Mohamed Hussein Hussein
Theses and Dissertations

In-Situ Optical Microscopic Investigation of the Dendrite Formation on Lithium Anode Under Different Electrolyte Conditions in Li-S Battery, Tianyao Ding
Theses and Dissertations

Microstructure, Wetting Angle and Corrosion of Aluminum-silicon Alloys, Shvetashva Suri
Theses and Dissertations

Computational Modeling of Transient Processes During Run-In for Tribological Systems, Rob Morien
Theses and Dissertations

Impact Location in an Isotropic Plate Without Training, Prasanna Rajbhandari
Theses and Dissertations

Advanced Self-Healing Polymer Composites for Wind Turbine Blades, Arun Kumar Koralagundi Matt
Theses and Dissertations

Covert Contrast: the Acquisition of Mandarin Tone 2 and Tone 3 in L2 Production and Perception, Liya Mar
Theses and Dissertations

Application of Reynolds Stress Model Using Direct Modeling and Actuator Disk Approaches for a Small-Scale Wind Turbine, Randall Scott Jackson
Theses and Dissertations

Numerical and Experimental Study of Liquid Breakup Process in Solid Rocket Motor Nozzle, Yi-Hsin Yen
Theses and Dissertations

Experimental and Numerical Characterization of Scalable Cellulose Nano-fiber Composite, Bamdad Barari Barari
Theses and Dissertations

A Study of the Hydrostatic and Hydrodynamic Properties of Aeoliscus Straigatus, Jeremy J. Keifenheim
Theses and Dissertations

Numerical and Experimental Studies of Atomic Layer Deposition for Sustainability Improvement, Dongqing Pan
Theses and Dissertations

Coding Strategies for Cochlear Implants Under Adverse Environments, Qudsia Tahmina
Theses and Dissertations

Effects of Surface Topography and Vibrations on Wetting: Superhydrophobicity, Icephobicity and Corrosion Resistance, Rahul Ramachandran
Theses and Dissertations

Modeling the Feasibility of Corn Stover Combustion as a Heat Source at Corn Ethanol Plants, Sulekha Tamvada
Theses and Dissertations

Multi-Level Optimal Design Using Game Theory with Model Updating By Low Discrepancy Sampling, Yanchen Xu
Theses and Dissertations

Performance Optimization and Statistical Analysis of Basic Immune Simulator (BIS) Using the FLAME GPU Environment, Shailesh Tamrakar
Theses and Dissertations

Inverse Approaches for Recovery of Distributed Loads, Aleysha Kobiske
Theses and Dissertations

Dynamic Moving Load Identification Using Optimal Sensor Placement and Model Reduction, Paul Augustine
Theses and Dissertations

Investigation of Distributed Model Predictive Control for Economic Load Shifting in Building HVAC Systems, Peter Kinsella
Theses and Dissertations

Evaluation and Forecast of Energy Consumption in Different Sectors of the United States Using Artificial Neural Networks, Arash Kialashaki
Theses and Dissertations

Carbon Dioxide Photoreduction with Water Vapor By Titanium-containing Magnesium-Aluminum Layered Double Hydroxides, Jinye Xu
Theses and Dissertations

On the Nonlinear Tribological Jerk Dynamics at Sliding Interfaces, Divyeshkumar Patel
Theses and Dissertations

Novel Substrate-Bound Hybrid Nanomaterials for Anode Electrodes in Lithium-Ion Batteries, Haejune Kim
Theses and Dissertations

Characterization of Carbon-Fiber Reinforced Polyetherimide Thermoplastic Composites Using Mechanical and Ultrasonic Methods, Mohannad A. Alhaidri
Theses and Dissertations

A Study of the Development of an Analytical Wall Function for Large Eddy Simulation of Turbulent Channel and Rectangular Duct Flow, Takahiko Hasegawa
Theses and Dissertations

Effect of Junction Geometry on Monodispersed Microdroplet Generation in Microfluidic Aqueous Two-Phase Systems, Young Gyu Nam
Theses and Dissertations

Experimental, Numerical and Analytical Characterization of Torsional Disk Coupling Systems, Alex B. Francis
Theses and Dissertations

Wetting, Superhydrophobicity, and Icephobicity in Biomimetic Composite Materials, Vahid Hejazi
Theses and Dissertations

Development of Novel Passive Control Techniques for More Uniform Temperature at Combustor Exit and Hybrid Les/Rans Modeling, Alka Gupta
Theses and Dissertations

Damage Detection of Mixed-Mode Cracks in Large Truss Structures Using Wavelet Transform, Hussain Altammar
Theses and Dissertations

Reactor Scale Simulation of Atomic Layer Deposition, Mohammad Reza Shaeri
Theses and Dissertations

Effect of Processing Parameters and Matrix Shrinkage on Porosity Formation During Synthesis of Metal Matrix Composites with Dual-scale Fiber Reinforcements Using Pressure Infiltration Process, Reihaneh Etemadi
Theses and Dissertations

Modeling of Instabilities and Self-Organization at the Frictional Interface, Vahid Mortazavi
Theses and Dissertations

Improved Wind Turbine Control Strategies for Maximizing Power Output and Minimizing Power Flicker, Quan Chen
Theses and Dissertations

Gait and Locomotion Analysis for Tribological Applications, Md Hayder Ali
Theses and Dissertations

An Experimental Investigation Characterizing the Tribological Performance of Natural and Synthetic Biolubricants Composed of Carboxylic Acids for Energy Conservation and Sustainability, Carlton Jonathan Reeves
Theses and Dissertations

Wind Turbine Controls for Farm and Offshore Operation, Zhongzhou Yang
Theses and Dissertations

Techniques for Optimum Design of Actively Controlled Structures Including Topological Considerations, Arjumand Ali
Theses and Dissertations

Finite Element Analysis of Contribution of Adhesion and Hysteresis to Shoe-floor Friction, Seyed Reza Mirhassani Moghaddam
Theses and Dissertations

Techniques for Engine Mount Modeling and Optimization, Fadi Alkhatib
Theses and Dissertations

Inverse Methods for Load Identification Augmented By Optimal Sensor Placement and Model Order Reduction, Deepak Kumar Gupta
Theses and Dissertations

Aqueous Turbulence Structure Immediately Adjacent to the Air - Water Interface and Interfacial Gas Exchange, Binbin Wang
Theses and Dissertations

Hydrogen Generation from Magnesium Hydride By Using Organic Acid, Yen-Hsi Ho
Theses and Dissertations

Heat Transfer Analysis of Two Pass Cooling Channel of Gas Turbine Blade with Analytical Wall Function Turbulence Approach, Hitoshi Arakawa
Theses and Dissertations

Effects of Internal Resistance on Performance of Batteries for Electric Vehicles, Rohit Anil Ugle
Theses and Dissertations

Bi- and Multi Level Game Theoretic Approaches in Mechanical Design, Ehsan Ghotbi
Theses and Dissertations

Mechanics of Bolted Electrical Splices, Samuel Alberts
Theses and Dissertations

Low Turbulence Wind Tunnel Design and Wind Turbine Wake Characterization, Andrew Welsh
Theses and Dissertations

Investigation of Some Self-Optimizing Control Problems for Net-Zero Energy Buildings, Xiao Li
Theses and Dissertations

Development and Validation of a Mathematical Model for Predicting the Performance of Rotary Hammer Drills, Will Didier
Theses and Dissertations

Fuzzy Logic Controller for Parallel Plug-in Hybrid Vehicle, Sk. Khairul Hasan
Theses and Dissertations

Discovery and Correction of Bias in Precision Landmark Location, Colin Foster
Theses and Dissertations

Aerodynamic Analysis and Drag Coefficient Evaluation of Time-Trial Bicycle Riders, Peter Nicholas Doval
Theses and Dissertations

Investigation of Heat Transfer and Flow Using Ribs Within Gas Turbine Blade Cooling Passage: Experimental and Hybrid Les/rans Modeling, Sourabh Kumar
Theses and Dissertations

Material Behavior Characterization of a Thin Film Polymer Used in Lithium-Ion Batteries, Michael James Martinsen
Theses and Dissertations

Application Potential of Solar PV, Wind and Fuel Cells Technologies for Global Sustainability Improvement, Qiang Zhai
Theses and Dissertations

Preventing Sheet Metal Wrinkling in Coil Lines, David Steven Revers
Theses and Dissertations